FAQ
Preparations
Will the sauna arrive to my site completely ready-to-use?
Yes. The Hetki sauna is transported to your plot completely ready on a truck, from where it is lifted by a crane to your desired location. You just have to reserve a suitable flat and load-bearing place for the sauna, arrange to connect the sauna to the electricity network and finally put the sauna stones in the heater. In the case of a wood burning stove, the flue and pipe must be reassembled by a professional.
Does the sauna with a wood-burning stove also come completely ready?
A sauna with a wood-burning stove comes to your yard completely ready, except that the stove's flue and pipe have been dismantled during transport. The stove with its flue and pipe are installed in place at the factory, but they have been disassembled during transport so that their joints are not damaged during transport and possibly cause a fire hazard later. Our dealer will help you find a professional to reassemble them back together. This is a much easier procedure than installing a new one, because all the roof penetrations are already made. The exact location of the stove is marked on the floor and the fire protections are already installed. After the flue and pipe are installed, you just add the stones to the stove and the wood to the hearth of the stove. The stove is preheated at the factory, so you can start enjoying your new wood burning stove right away.
Does a Hetki sauna require a building permission?
Such a small building often does not require a building permission, but it depends on the municipality/city, so you should check with your local authorities. Your Hetki reseller can also help you.
What kind of preparations do I need to make in my site?
A Hetki sauna needs a flat and solid surface. A sauna should be off the ground so the wooden parts do not come into contact with the moisture from the ground. There is no need for a separate foundation because the sauna is supported by its own fixed bases. In the case of a wood-burning stove, you need a professional to reassemble the flue and chimney. You will need an electrician on site to connect the sauna to the mains. Our reseller will be happy to help you with this as well.
